The Datacryptor
Link establishes secure point-to-point communications
transparent to data protocols over private or public networks. The
Datacryptor AP E3/T3 model supports data rates up to 45 Mbps. Standard,
high and very high speed models are available.
The Standard model is capable of synchronous data transmission at speeds
up to 512 Kbps over RS-232, V.35 and V.11/X.21. The High Speed model
is capable of data transmission on a framed or unframed T1/E1 interfaces
at speeds up to 1.544/2.048 Mbps; 8Mbps over V.35 and X.21 in the case
of the very high speed model. These units will also operate unframed
over RS-232, V.35 and V.11/X.21 up to 8 Mbps with suitable 'smart' cables.
In addition, a Channelised model is available to protect data transmitted
over multi point dedicated circuits where framed user data is presented
in 24 or 32 timeslots at the central (channelised) site and distributed
to multiple remote sites as single or multiple 56K/64K circuits. This
model can support up to 31 encrypted timeslots connected to remote peer
units, significantly reducing the cost of deploying a secure multi point
leased line network. In band communication techniques for management
and key exchanges are used and remote units can be Channelised, Standard,
or High Speed Link Datacryptors.
With few high speed link encryption devices available in the market,
the Datacryptor AP E3/T3 delivers wire-speed encrypted data transfer
at rates from 34 to 45 Mbps, together with the easy to use centralized
management application, Element Manager, which is common across the Datacryptor
range. Element Manager enables single-point monitoring with secure control
of the entire Datacryptor family of encryptors in a customers' network
infrastructure, thereby reducing the total initial investment and recurring
training costs.
|
