SW2 Toggled

1: See Note 1: Enables operation of SNA/SDLC Down Left: Disabled

in Firmware Down Right: Enabled

2: As Required: Sets console Baud rate default Down Left: 300 Baud

Down Right: 19200 Baud

3: As Required: Enables DSP Down Left: Disabled

Down Right: Enabled

4: See Note 2: Down Left: 8k

Buffer

Down Right:16k Buffer

5: Down Left

6: Down Left

7: Down Left

8: Down Left

Note 1:

When this switch is set to enabled, the function is available in the Host Configuration script (CH console command).

If it is disabled, SNA/SDLC is not shown in this script and therefore can not be selected.

Note 2:

This switch indicates the size of the I/O buffer enabled within an RG7210 and is factory set at production time.